DIY NAME STAMP
- Products
- Stamps
- Shachihata
- DIY NAME STAMP
- DIY NAME STAMP
Makes printing your name simple, clear, and quick!
Line-up
Choose a product
Ideal for stamping name on plastic, metal, cloth and wood.
Ink colour
1 colour
- BLACK
- Item name
- DIY NAME STAMP
- Item code
- EGA-C1S
-
REFILLABLE
Refill ink is available
-
ONLY INK CONFORMS TO RoHS
- Oil based water proof ink makes it useful for stamping on paper, plastic, metal, cloth, and wood!
- Ironing is not required after stamping on the cloth.
- Characters can be freely rearranged.
- Comes with an alignment guide that helps you make clear impressions.
The alignment guide can also be used as a stand for the DIY NAME STAMP.
- The cap on the holder part allows you to store it without getting ink on any surface after use.
Sample
EGS-C1S
Details
How to Use
- Remove the characters you need from the rubber sheet.
- Characters can be removed by hand.
If characters are difficult to remove, cut using scissors.
- Characters can be removed by hand.
- Insert the characters into the character holder one at a time from the right end, making sure they are facing the correct direction.
- Open the lid of the stamp pad and fill the entire ink pad.
- Press the DIY NAME STAMP onto the ink pad a few times and test the stamp before making your final stamp.
- This product uses an oil based quick dry ink. Always close the lid of the stamp pad after use.
The next time you use the stamp, make a test impression to check whether the ink is lighter, and refill the ink as required.
- This product uses an oil based quick dry ink. Always close the lid of the stamp pad after use.
Caution
- An adult must be present when children are using this product.
- This ink contains combustible solvent. Do not use near open flames.
- The ink is a chemical product. Avoid mixing it with other inks.
- This product is not suitable for using on PVC plastic.
Note that some other materials may not be suitable for using. - Even with 100% cotton, the ink may not apply properly depending on how the fabric is woven.
- Stamp may not be used for smaller area. In that case, use an oil based marker to write your name.
- Use an Artline permanent marker, sold separately.
- Repeated washing may fade the impression or erase it.
Character List
EGA-CSTP-K
How to Refill Ink
- With your hand on the holder part of the ink bottle, place it upright and slowly remove the cap.
- Gripping the bottle with too much force may cause the ink to spill out.
- Open the lid of the stamp pad and refill the entire ink pad.
- Be careful not to pour too much ink. It may leak out during storage, or the stamped imprint may bleed.
- When the ink pad dries out, refill it with ink.
- Replace the ink bottle's cap immediately after use.
- This product uses an oil based quick dry ink. Always close the lid of the stamp pad after use. The next time you use the stamp, make a test impression to check whether the ink is lighter, and refill the ink as required.
- After use, remember to set the holder, close the lid of the stamp pad, and store them horizontally.
How to change Ink Pad
- Open the lid of stamp pad and take out the used ink pad.
- Ink pad can be removed easily by inserting a pointed object into the ink pad. Then slide it out from the side.
- With white cloth side up, slide the ink pad from the side to fit.
Caution
- An adult must be present when children are using this product.
- This ink contains combustible solvent. Do not use near open flames.
- The ink is a chemical product. Avoid mixing it with other inks.
- This product is not suitable for using on PVC plastic. Note that some other materials may not be suitable for using.
- Even with 100% cotton, the ink may not apply properly depending on how the fabric is woven.
- Do not use this product on anything that makes direct contact with your mouth.
- Imprints may be erased if exposed to solvents such as alcohol or if rubbed with sufficient force.
- Repeated washing may fade the impression or erase it.
- Store the stamp in a cool, dark place and out of the reach of children.
- In the event that a large amount of ink is accidentally spilled on your skin, it may cause a negative reaction depending on your skin sensitivity. Wash off with soap immediately. In case, if ink comes in contact with your face, eyes, or any wounds, contact a doctor immediately.